manualshive.com logo in svg

Riso RZ5 Series, Technical Manual, Page: 111 / 410

Share
Download
Riso RZ5 Series Technical Manual Download Page 111

RISO Inc. Technical Services & Support

       

       

       

       

       

US.RISO.COM

CHAPTER 8:  PRINT DRUM SECTION

[ 8 - 23 ]

Ink drive gear

Squeegee drive gear

Drive shaft lock plate

Squeegee gear

Squeegee idle gear

14. Removing the Squeegee Roller

(1) Make a confidential master on the print drum and pull out the drum from the machine.

0857

0858

(2) Remove the following components.

- Screen assembly
- Master clamp base assembly
- Drum body
- Drum cover
- Drum side frames (2pcs)

- Drum rear frame assembly
- Drum joint
- Flange-R
- Drum front frame assembly
- Flange-F

(3) Detach the driven shaft support plate by removing a screw (M4x8: 1pc).

(4) Remove the driven shaft gear.

(5) Remove the squeegee gear by detaching an E-ring.

(6) Remove the squeegee idle gear on the rear of the print drum by detaching an E-ring.

(7) Also from the rear of the print drum, remove the squeegee drive gear by detaching an E-ring.

- continues on next page -

Summary of Contents for RZ5 Series



























































































































































































































































































































































































































Reviews:

No comments