Riso RZ5 Series Technical Manual Download Page 201

Page: 201 / 410

RISO Inc. Technical Services & Support

US.RISO.COM

CHAPTER 13: MASTER MAKING SECTION

[ 13 - 23 ]

10. Removing the Write Roller

(1) Pull out the master making unit and switch off the machine power.

(2) Open the master making unit upper cover and remove following items.

- Master roll
- master making cover front
- Write pulse motor assembly
- Master guide gate (excluding A3/Ledger machines)

(3) Detach the write roller pulley by removing a screw (M3x8: 1pc).

(4) Detach the bearing support bracket (front) by removing screws (M3x6: 2pcs).

(5) Pull out the write roller through the hole on the side frame.

Bearing support bracket (front)

Pulley

Write roller

< Write roller >

1445

1446

Summary of Contents for RZ5 Series



























































































































































































































































































































































































































Search results

Summary of Contents for RZ5 Series

Reviews:

Riso RZ5 Series, Technical Manual, Page: 201 / 410

Search results

Summary of Contents for RZ5 Series

Reviews: