manualshive.com logo in svg

Riso RZ5 Series, Technical Manual, Page: 28 / 410

Share
Download
Riso RZ5 Series Technical Manual Download Page 28

RISO Inc. Technical Services & Support

       

       

       

       

       

US.RISO.COM

CHAPTER 3:  MAIN DRIVE

[ 3 - 10 ]

0313

0314

0315

3.  Removing the Main Motor Pulley Assembly

(1) Remove the Main belt from the machine (Refer to page 3-8).

(2) Loosen set screws (M6x8: 2pcs), and detach the main motor pulley assembly.

Groove on the back of the Main motor pulley.

Parallel pin on the Main motor shaft.

Main motor pulley assembly

<< Precaution in assembly >>

- Align the groove made on the back of the Main motor pulley assembly against the Parallel pin on

the Main motor shaft.

Summary of Contents for RZ5 Series



























































































































































































































































































































































































































Reviews:

No comments