Riso RZ5 Series, Technical Manual, Page: 241 / 410

RISO Inc. Technical Services & Support US.RISO.COM
CHAPTER 14: PANEL MESSAGE
[ 14 - 23 ] RZ5 (Revision 1.0)
Errors involving consumables
Error Type C01 [Replace ink cartridge]
Description
C01-xxx
No Ink
Replace Ink Cartridge
To reset
display
Remove the empty ink cartridge and replace with a new one.
Error Point Error Conditions
512 The ink sensor did not go ON even when inking was performed for a preset duration.
563 Ink remaining amount is zero from the information on the RF-Tag.
574 Inkless error was detected 5 times consecutively on one same ink cartridge.
Error Type C02 [Replace master roll]
Description
C02-xxx
No Master
Replace Master Roll
To reset
display
Remove the empty master roll and replace with a new one.
Error Point Error Conditions
200
The master end was detected twice in succession at 10-milliseconds intervals during master
transport.
240 Master remaining amount is zero from the RF-Tag information.
253 Masterless error was detected twice consecutively on one same master-roll.
Error Type C03 [Master disposal box full]
Description
C03-xxx
Master Disposal Box is Full
Empty Master Disposal Box
To reset
display
Remove master disposal box from the machine, throw away the disposed master from the
disposal box and return the disposal box in the machine after an interval of over 5 seconds.
Error Point Error Conditions
308
Compression detection position was reached before the master-compression-motor encoder-
sensor count reached the specified level, after the master compression motor turned ON in the
compressing direction.
Error Type C04 [No paper on the paper feed tray]
Description
C04-xxx
Add Paper
To reset
display
Add paper on the paper feed tray.
Error Point Error Conditions
402 Paper detection sensor is OFF (not detecting paper).