Riso RZ5 Series Technical Manual Download Page 72

Page: 72 / 410

RISO Inc. Technical Services & Support

US.RISO.COM

CHAPTER 5: SECOND PAPER FEED SECTION

[ 5 - 14 ]

(4) Unplug the connector of the print positioning pulse motor.

(5) Unplug the connector of the vertical centering sensor, and unhook the reusable band.

(6) Remove screws ( M4x8: 4pcs) of the paper feed drive unit.

(7) Unhook the paper feed drive unit from the machine while rotating the G-lever assembly to the right by hand,

making a way for the unit to come out, remove the unit from the machine.

- Precausion on assembly continues on next page -

Hook on vertical base bracket

Vertical pulse motor

Paper feed drive unit

G-lever assembly

Reusable band

Vertical centering sensor

0522

Summary of Contents for RZ5 Series



























































































































































































































































































































































































































Search results

Summary of Contents for RZ5 Series

Reviews:

Riso RZ5 Series, Technical Manual, Page: 72 / 410

Search results

Summary of Contents for RZ5 Series

Reviews: