manualshive.com logo in svg

Riso RZ5 Series, Technical Manual, Page: 42 / 410

Share
Download
Riso RZ5 Series Technical Manual Download Page 42

RISO Inc. Technical Services & Support

       

       

       

       

       

US.RISO.COM

CHAPTER 4:  FIRST PAPER FEED SECTION

[ 4 - 10 ]

Disassembly

1. Removing the Paper Feed Tray Unit

(1) Lower the paper feed tray all the way down and switch OFF the machine power.

(2) Close the paper feed tray and detach the hinge cover by removing screws (M3x6: 2 pcs).

(3) Open the paper feed tray and remove the flat wire harness cover by removing screw (M3x5: 1pc).

(4) Remove the connector cover by removing screw (M3x5 :1pc).

(5) Pull out the flat wire harness from the connector and unhook the wire harness holder (clear Mylar sheet)

from the paper feed tray mount.

(6) Remove E-rings (1pc each) on the left and right of the paper feed tray unit, and remove the tray unit from the

machine.

Paper feed tray unit

0415

0447

Hinge cover

Summary of Contents for RZ5 Series



























































































































































































































































































































































































































Reviews:

No comments