Riso RZ5 Series Technical Manual Download Page 105

Page: 105 / 410

RISO Inc. Technical Services & Support

US.RISO.COM

CHAPTER 8: PRINT DRUM SECTION

[ 8 - 17 ]

8. Removing the Ink Bottle Lock Assembly & Antenna PCB

(1) Make a confidential master on the print drum and pull out the drum from the machine.

(2) Remove the following components.

- Screen assembly
- Master clamp base assembly
- Drum body
- Ink pump assembly
- Ink bottle guide assembly

Removing the Ink Bottle Lock Assembly

(3) Remove screws (M3x8: 2pcs) and detach the ink bottle lock assembly from the ink bottle guide assembly.

PCB holder

Antenna PCB

Ink bottle guide assembly

Ink bottle guide (bottom)

Removing the Antenna PCB

(3) Separate the ink bottle guide (top) from the ink bottle guide (bottom) by unhooking the claws.

(4) Remove the antenna PCB from the PCB holder.

Ink bottle guide assembly

Ink bottle lock assembly

0840

0841

0842

0843

Ink bottle guide (top)

Summary of Contents for RZ5 Series



























































































































































































































































































































































































































Search results

Summary of Contents for RZ5 Series

Reviews:

Riso RZ5 Series, Technical Manual, Page: 105 / 410

Search results

Summary of Contents for RZ5 Series

Reviews: