![background image](http://html1.mh-extra.com/html/rainbow/turbo-carnival-clubhouse/turbo-carnival-clubhouse_assembly-instructions-manual_3449621098.webp)
A
1"
2 1/2"
30 1/4"
3 3/8"
3 1/4"
1"
HOLES 1" FROM
END OF BOARD
6932
4069
4021
4021
3398
7852
6932
FLUSH
B
4020
H97
H1
H1
H97
7852
4021
4021
4021
3398
H1
H97
4019
6932
3146
6932
6932
6932
FLUSH
4937
*NOTE: Spiral Slide can only be mounted on the 60" Deck Height.
*NOTE: Installation processes are shown with the Tarp Version, the Wood Roof will use the
same processes unless otherwise noted.
1.
Position the bottom Penthouse Side Board
(3398) 3 3/8"
up from bottom of Penthouse Corner Posts
(6932)
and attach using 1/4" Hardware
(H1) (H97)
.
*NOTE: Bottom of Penthouse Side Board (3398) will be flush with bottom of the Deck Boards
when properly installed.
*NOTE: Holes in the ends of Penthouse Side Boards (3398) (4021) are drilled at different
distances. Be sure that Side Boards are oriented as shown in Inset A.
2. Position the top Penthouse Side Board
(4020) 1"
down from top of Penthouse Corner Posts
(6932)
and attach using 1/4" Hardware
(H1) (H97)
.
*NOTE: Top of Penthouse Side Board (4020) will be flush with tops of Tarp Facias (3146)
(4937) when properly installed.
3. Equally space, and continue attaching remaining Penthouse Side Boards
(4021)
using 1/4" Hardware
(H1) (H97)
. Spacing between remaining Side Boards will be approximately
2 1/2"
.
4. Position Penthouse Spiral Upright
(7852)
directly
on Deck and attach through Penthouse Side
Boards
(3398) (4021)
using 1/4" Hardware
(H1) (H97)
.
*NOTE: Penthouse Upright (7852) will
measure 30 1/4" from Penthouse
Corner Post (6932) when
properly installed.
5. Finish attaching Penthouse Side Board
(3398)
to Deck Board
(4068)
using 1/4" Hardware
(H1) (H97)
. Be sure to pre-drill Deck Board
(4019)
using a
1/8" drill bit
to avoid splitting
out Deck Board.
INSET A
97
Step 50
Penthouse Side Board
Installation (for Spiral Slide)