![background image](http://html1.mh-extra.com/html/rainbow/turbo-carnival-clubhouse/turbo-carnival-clubhouse_assembly-instructions-manual_3449621041.webp)
6174
6173
H5
H71
6132
H4
H12
H18
H29
H3
H116
6175
H74
H5
H3
H116
6108
6107
H34
H3
H116
H131 H11
H3
H34
H78
H5
BE SURE TO INSTALL
HARDWARE (H5) (H71)
PRIOR TO INSTALLING
SLIM BRACKET (6107)
4050
USE THESE BOLTS
TO HOLD MAIN
BEAM IN PLACE
COUNTER BORED
HOLE FACING IN
COUNTER BORED
HOLE FACING IN
POUND T-NUTS INTO
BACKS OF UPRIGHTS
MAIN BEAM FLUSH WITH
FACE OF THIS UPRIGHT
A
COUNTER BORED
HOLES IN MAIN
BEAM (6132)
FACING OUT
INSET A
*
NOTE: Pre-drill 1/4" holes for all 3/8" Lag Bolts.
1. Using a hammer, pound 3/8" T-Nuts
(H34)
into bottom holes of the Corner Uprights
(6173) (6174)
and
attach 4 Hole Facia
(4050)
through bottom holes only using 3/8" Hardware
(H3) (H11) (H34) (H131)
.
Ends and bottom of 4 Hole Facia
(4050)
must be flush with Corner Uprights
(6129)
when properly
installed.
2. Attach upper Main Beam
(6132)
to Corner Uprights
(6173) (6174)
using 3/4" Hardware
(H5)
and 1/2"
Hardware
(H4) (H12) (H18) (H29) (H71)
.
3. Position the second Main Beam
(6175)
(as shown in Inset A) against Corner Uprights
(6173) (6174)
and insert 3/4" Hardware
(H5)
and 1/2" Hardware
(H74)
through Corner Uprights and Main Beam
holes, but do not attach.
4. Ensure wall assembly is plumb and square and install 3/8" Hardware
(H3) (H116)
into top holes of
4 Hole Facia
(4050)
.
5. Install 3/4" Hardware
(H5) (H78)
into hole in Corner Upright
(6174)
(as shown).
6. Install Left Slim Bracket
(6108)
and Right Slim Bracket
(6107)
up against Corner Uprights
(6173)
(6174)
and Main Beam
(6175)
using 3/8" Hardware
(H3) (H116)
.
*NOTE: Slim Bracket (6107) should be pushed up tight to previously installed 3/4" Hardware
(H5) (H78). Remaining faces of Slim Brackets (6107) (6108), Main Beam (6175) and
Corner Uprights (6173) (6174) should have no gaps when properly installed.
7. Remove previously installed 3/4" Hardware
(H5)
and 1/2" Hardware
(H74)
from Main Beam
(6175)
.
Main Beam will stay in place.
40
Step 1
First Wall Assembly