![background image](http://html1.mh-extra.com/html/rainbow/turbo-carnival-clubhouse/turbo-carnival-clubhouse_assembly-instructions-manual_3449621109.webp)
A
B
C
6932
7854
H3 H119
3401
7852
6932
3401
4028
H155
H155
FLUSH
3398
4020
H164
H1 H108
H164
H1
H108
*NOTE: Spiral Slide can only be mounted on Penthouse mounted on the on 60" Deck Height.
1. Position Spiral Filler Board
(7854)
directly under Penthouse Deck, pushed up tight against
Penthouse Corner Post
(6932)
(as shown in Inset A). Attach Filler Board to Monkey Bar using
3/8" Hardware
(H3) (H119)
.
2. Position Spiral Filler Boards
(3401)
against Spiral Upright
(7852)
and Penthouse Corner Post
(6932)
,
pushed up to bottom of Penthouse Side Board
(4020)
(as shown in Inset B). Attach Filler Boards
(3401)
using #8 Hardware
(H155)
.
3. Center Spiral Filler Board
(4028)
between Filler Boards
(3401)
and attach using #8 Hardware
(H155)
(as shown in Inset B).
*NOTE: Top of Filler Board (4028) must be flush with top of Penthouse Side Board (3398)
when properly installed (as shown in Inset B).
4. Stand up Spiral Slide, centering slide on opening, and attach to Penthouse Side Board
(4020)
and
Filler Boards
(3401)
using 1/4" Hardware
(H1)
and 5/16" Hardware
(H108)
(as shown in Inset C).
*NOTE: Be sure to pre-drill Filler Boards (3401), through holes in slide, using a 1/8" drill bit
to avoid splitting out Filler Boards.
5. Finish attaching Spiral Slide to Penthouse Side Board
(4020)
and Filler Board
(4028)
using #14
Hardware
(H164)
(as shown in Inset C).
INSET A
INSET B
INSET C
108
Step 59
Spiral Slide
Installation