![background image](http://html1.mh-extra.com/html/rainbow/turbo-carnival-clubhouse/turbo-carnival-clubhouse_assembly-instructions-manual_3449621100.webp)
A
6133
N5
H167
H167
6148
N5
B
MATCH DRILL THROUGH
THESE HOLES
3137
6143
H3 H11 H131
C
3137
H34
H34
3137
INSET A
INSET B
INSET C
1. Position Safety Handles
(N5)
against Penthouse Corner Post
(6148) (6932)
and Center Post
(6138)
, in
approximate locations shown, and attach using #14 Hardware
(H167)
(as shown in Inset A).
2. Hold Step Block
(6143) (6696)
against Rail Uprights
(3137)
and match drill through counter bored
holes in Step Block using a
7/16" drill bit
(as shown in Inset B).
*NOTE: Ensure that when positioning Step Block (6143) against Rail Uprights that the counter
bored holes in Step Block line up with BOTH Rail Uprights.
3. Attach Step Block
(6143) (6696)
to Rail Uprights
(3137)
using 3/8" Hardware
(H3) (H11) (H34)
(H131)
(as shown in Inset B & Inset C).
*NOTE: A small hammer or mallet may be needed to pound in 3/8" Hardware (H34).
6696
6932
99
Step 52
Safety Handle & Step
Block Installation