![background image](http://html1.mh-extra.com/html/rainbow/turbo-carnival-clubhouse/turbo-carnival-clubhouse_assembly-instructions-manual_3449621090.webp)
Continued on next page:
*NOTE: Processes for mounting the Penthouse will be the same for both the 60" & 70" Deck Height
Monkey Bars unless otherwise noted.
*NOTE: Processes are shown for both Tarp and Wood Roof versions.
*NOTE: Processes will be the same if installing the Spiral Slide, unless otherwise noted. The Penthouse
with Spiral Slide can only be mounted on the 60" Deck Height.
Tarp Version:
*NOTE: If installing a Penthouse with a Tarp onto a set with a Wood Roof, refer to Step 74 for special
modification instructions.
1. On a flat surface layout Penthouse Corner Posts
(6148) (6932)
, with counter bored holes facing away from each
other,
30 5/8"
apart (as shown in Inset A).
2. Position Tarp Facia
(3177) (3146)
on top of and
1"
down from tops of Penthouse Corner Posts
(6148) (6932)
and attach using 1/4" Hardware
(H1) (H97)
.
3. Position Filler Boards
(6146) (6996) (6142) (6995)
on top of and
8 5/8"
up from bottoms of Penthouse Corner
Posts
(6148) (6932)
and attach using 3/8" Hardware
(H3) (H119)
(as shown in Inset A).
*NOTE: Filler Boards (6146) (6996) (6148) (6932) may need to be swapped from what is shown depending
on your specific set configuration. Filler Board (6146) (6996) must be lined up with the Center
Post (6133) (6140).
4. Layout the other two Penthouse Corner Posts
(6148) (6932)
, with counter bored holes facing away from each
other,
30 5/8"
apart (as shown in Inset C).
5. Position Tarp Facia
(4067) (4937) 1"
down from tops of Penthouse Corner Posts
(6148)
and attach using 1/4"
Hardware
(H1) (H97)
.
*NOTE: Do not install 1/4" Hardware in center hole of Tarp Facia (4067) (4937) if installing Tarp Version
(as shown).
6. Position Penthouse End Facia
(3178) (3143)
on top of and
3 3/8"
up from bottoms of Penthouse Corner Posts
(6148) (6932)
and attach using 1/4" Hardware
(H1) (H97)
(as shown in Inset C).
Wood Roof Version:
1. On a flat surface layout Penthouse Corner Posts
(6148) (6932)
, with counter bored holes facing away from
each other,
30 5/8"
apart (as shown in Inset B).
2. Position Tarp Facia
(3177) (3146)
on top of and
1"
down from tops of Penthouse Corner Posts
(6148) (6932)
and attach using 1/4" Hardware
(H1) (H97)
.
3. In center hole of Tarp Facia
(3177) (3146)
, attach 1/4" Hardware
(H1) (H9) (H32) (H215)
(as shown in Detail A).
*NOTE: A small hammer or mallet may be needed to pound 1/4" Hardware (H32) in to back side of Tarp
Facia (3177) (3146).
4. Position Filler Boards
(6142) (6995) (6149)
on top of and
8 5/8"
up from bottoms of Penthouse Corner Posts
(6148) (6932)
and attach using 3/8" Hardware
(H3) (H119)
(as shown in Inset A).
*NOTE: Filler Boards (6142) (6995) (6149) may need to be swapped from what is shown depending on
your specific set configuration. Filler Board (6142) (6995) must be lined up with the Center
Post (6133) (6140).
5. Layout the other two Penthouse Corner Posts
(6148)
, with counter bored holes facing away from each other,
30 5/8"
apart (as shown in Inset C).
6. Position Tarp Facia
(4067) (4937) 1"
down from tops of Penthouse Corner Posts
(6148) (6932)
and attach using
1/4" Hardware
(H1) (H97)
.
7. In center hole of Tarp Facia
(4067) (4937)
, attach 1/4" Hardware
(H1) (H9) (H32) (H215)
(as shown in Detail A).
*NOTE: A small hammer or mallet may be needed to pound 1/4" Hardware (H32) in to back side of Tarp
Facia (3177) (3146).
8. Position Penthouse End Facia
(3178) (3143)
on top of and
3 3/8"
up from bottoms of Penthouse Corner Posts
(6148) (6932)
and attach using 1/4" Hardware
(H1) (H97)
(as shown in Inset C).
89
Step 43
Penthouse Assembly