A
INSET A
6129
H93
N28
7129
7129
6173
6173
6129
6129
6173
7129
STAKE
STAKE
STAKE
STAKE
*WARNING: ALL UNDERGROUND UTILITIES MUST BE LOCATED BEFORE ANCHORING
PLAYSET.
*NOTE: Pre-drill 1/8" holes for all 1/4" Lag Bolts.
1. Drive Stakes
(N28)
into the ground (in locations shown) and attach to Corner Uprights
(6129) (6173)
and Swing Beam A-Frame Legs
(7129)
using 1/4" Hardware
(H93)
. Stakes should stick out
2"- 4"
above the ground.
*NOTE: Stakes must be as close as possible to the Corner Uprights and A-Frame Legs.
*NOTE: For maximum strength, drive Stakes into the ground at a slight angle.
*CAUTION: Do not hit washer while pounding the stakes into the ground. This may cause
washer to break off.
80
Step 36
Ground Stake
Installation