![background image](http://html1.mh-extra.com/html/rainbow/turbo-carnival-clubhouse/turbo-carnival-clubhouse_assembly-instructions-manual_3449621048.webp)
A
60"
87 5/16"
1 11/16"
OFFSET
HOLES
DOWN
9/16" DIA
HOLES
6129
6129
4050
H3
H116
4050
H34
H34
H3
H11 H131
H3
H116
H3
H11
H131
H116
H3
H3
H116
4050
6129
6129
4050
1. Pound 3/8" T-Nuts
(H34)
into bottom holes in backs of Corner Uprights
(6129)
. Attach 4 Hole Facias
(4050)
to Corner Uprights
(6129)
using 3/8" Hardware
(H3) (H11) (H34) (H131)
. Insert 3/8" Hardware
in bottom holes only. Ends and bottom of 4 Hole Facia
(4050)
must be flush with Corner Uprights
(6129)
when properly installed.
2. Measure up
60"
and attach 4 Hole Facias
(4050)
to Corner Uprights
(6129)
using 3/8" Hardware
(H3)
(H116)
. Ends of Facias must be flush with outside faces of Uprights and oriented as shown, with offset
holes down.
3. Check that Wall Assembly is plumb and square and insert 3/8" Hardware
(H3) (H116)
into top holes
of 4 Hole Facias
(4050)
.
4. On front two Corner Uprights
(6129)
, measure up
87 5/16"
and drill a quantity of two
9/16" diameter
holes
using a
9/16" drill bit
.
*NOTE: Holes must be drilled in center of Corner Uprights (6129) when properly drilled.
47
Step 8
Lower Level Wall
Assembly