![background image](http://html1.mh-extra.com/html/rainbow/turbo-carnival-clubhouse/turbo-carnival-clubhouse_assembly-instructions-manual_3449621106.webp)
Continued on next page:
*NOTE: Spiral Slide can only be mounted on the Penthouse on the 60" Deck Height.
*NOTE: Alignment for the Left Turn Spiral Slide sections are shown on the next page.
Alignment for the Right Turn Spiral Slide sections are shown page 107.
For Left Turn Slide:
1. Line up the long seam on the Spiral Entrance Panel
(N378)
with the long seam on the first 90
Elbow
(N194)
. Rotate the 90 Elbow two holes to the left (counter clockwise) and attach using
3/8" Hardware
(H3) (H11) (H17) (H28) (H44)
.
*NOTE: Do not fully tighten hardware until all 3/8" Bolts are inserted in each spiral section.
2. Line up the long seam on the second 90 Elbow
(N194)
with the long seam on the first 90 Elbow
(N194)
. Rotate the second 90 Elbow two holes to the right (clockwise) and attach using 3/8"
Hardware
(H3) (H11) (H17) (H28) (H44)
.
3. Line up the short seam on the second 90 Elbow
(N194)
with the short seam on the third 90 Elbow
(N195)
. Rotate the third 90 Elbow two holes right (clockwise) and attach using 3/8" Hardware
(H3)
(H11) (H17) (H28) (H44)
.
4. Line up the holes in the Landing
(N196)
with the holes in the third 90 Elbow
(N195)
and attach using
3/8" Hardware
(H3) (H11) (H123)
(as shown in Detail A).
For Right Turn Slide:
1. Line up the long seam on the Spiral Entrance Panel
(N378)
with the long seam on the first 90
Elbow
(N194)
. Rotate the 90 Elbow two holes to the right (clockwise) and attach using 3/8" Hardware
(H3) (H11) (H17) (H28) (H44)
.
*NOTE: Do not fully tighten hardware until all 3/8" Bolts are inserted in each spiral section.
2. Line up the long seam on the second 90 Elbow
(N194)
with the long seam on the first 90 Elbow
(N194)
. Rotate the second 90 Elbow two holes to the left (counter clockwise) and attach using 3/8"
Hardware
(H3) (H11) (H17) (H28) (H44)
.
3. Line up the short seam on the second 90 Elbow
(N194)
with the short seam on the third 90 Elbow
(N379)
. Rotate the third 90 Elbow two holes left (counter clockwise) and attach using 3/8" Hardware
(H3) (H11) (H17) (H28) (H44)
.
4. Line up the holes in the Landing
(N196)
with the holes in the third 90 Elbow
(N379)
and attach using
3/8" Hardware
(H3) (H11) (H123)
(as shown in Detail A).
105
Step 58
Spiral Slide
Assembly