![background image](http://html1.mh-extra.com/html/rainbow/turbo-carnival-clubhouse/turbo-carnival-clubhouse_assembly-instructions-manual_3449621082.webp)
BACK SIDE OF
SUPPORT
COUNTER BORED
HOLES UP
STEPS CENTERED
IN NOTCHES
7027
7026
4071
6147
7029
7028
H3
H119
H216
N3
H188
23 7/8"
24"
1 1/4"
7027
7026
6147
7029
7028
4071
N3
*NOTE: The 60" Deck Height Monkey Bar can only be mounted on the lower level.
1. Place Left and Right Monkey Bar Arms
(7026) (7027)
on a flat surface directly across from each other,
oriented with counter bored holes facing up as shown.
2. Insert Pipes
(N3)
into pipe holes in both Monkey Bar Arms
(7026) (7027)
to connect the two Monkey
Bar Arms
(7026) (7027)
together.
*NOTE: Monkey Bar assembly must measure 23 7/8" wide when properly assembled.
3. Ensure width of Monkey Bar assembly is
23 7/8"
wide (as shown) and insert #8 Hardware
(H216)
through pre-drilled holes in Monkey Bar Arms
(7026) (7027)
into Pipes
(N3)
, to secure Pipes in pipe
holes.
4. Position Monkey Bar Support Legs
(7028) (7029)
on flat surface directly across from each other, with
back sides of Support Legs facing up.
5. Center Ladder Steps
(4071)
in notches of Support Legs
(7028) (7029)
and attach using #8 Hardware
(H188)
.
*NOTE: Inside faces of Support Legs must measure 24” when properly assembled.
6. Measure up
1 1/4”
from bottom of Support Legs
(7028) (7029)
and attach Monkey Bar Ground
Runner
(6147)
to back side of Monkey Bar Support using 3/8” Hardware
(H3) (H119)
.
*NOTE: Counter bored holes in Monkey Bar Ground Runner (6147) should be centered on
Support Legs (7028) (7029) when properly installed.
81
Step 37
60" Deck Height Monkey
Bar Assembly