![background image](http://html1.mh-extra.com/html/rainbow/turbo-carnival-clubhouse/turbo-carnival-clubhouse_assembly-instructions-manual_3449621065.webp)
2
A
H119 H3
6132
6130
4053
SINGLE
KNOT
DOUBLE
KNOT
DOUBLE KNOT
ON BACK SIDE
N64
PUSH TOP ROCK WALL BOARD
UP TIGHT TO ROCK WALL
MOUNTING FACIA
N9
H164
DETAIL A
H124
C
6130
H3
H119
6132
INSET A
1. Position assembled Rock Wall against Rock Wall Mounting Facia
(4053)
. Ensure Rock Wall is
centered in opening and attach to Rock Wall Mounting Facia
(4053)
using #14 Hardware
(H164)
(as shown in Detail A).
*NOTE: Top Rock Wall Board must be pushed up tight to Rock Wall Mounting Facia when
properly installed.
2. Fully tighten 3/8" Hardware
(H124)
in 90 Brackets
(N9)
.
3. On back side of Top Joist
(6132)
, center and attach Rope Block
(6130)
using 3/8" Hardware
(H3)
(H119)
(as shown in Inset A).
*NOTE: Top of Rope Block must flush with top of Top Joist when properly installed.
4. Lace Rope
(N64)
through bottom of Rope Block
(6134)
and tie a double knot on top side of Rope
Block. Tie a
qty. of three
, equally spaced, single knots in Rope. Lace end of Rope through bottom
Rock Wall Board and tie a double knot in back side.
*WARNING: To prevent the risk of strangulation, three knots must be tied in rope and rope
must be secured at both ends. Rope must be tight enough that it cannot be looped
back on itself, and no more than 12" of rope should be left after tying double
knots at the top and bottom of the rope.
64
Step 23
Rock Wall
Installation