![background image](http://html1.mh-extra.com/html/rainbow/turbo-carnival-clubhouse/turbo-carnival-clubhouse_assembly-instructions-manual_3449621061.webp)
B
4047
4048
3201
4045
4046
H34
H34
N9
N9
N9
H11
H124
H11
H124
N9
H32
H166
H7
H7
H171
H32
H171
H7
H7
H166
N156
N156
*NOTE: Do not fully tighten 3/8" Hardware (H124) in this step.
1. Position Ladder Legs
(4045) (4046)
and Rock Wall Legs
(3201)
as shown and install 3/8" Hardware
(H34)
into pre-drilled holes. A small hammer or mallet may be used to gently tap hardware flush
with the wood.
*NOTE: Rock Wall Legs (3201) must point in opposite directions when T-Nuts (H34) are
installed.
2. Install 1/4" Hardware
(H32)
into pre-drilled holes of Rock Wall Boards
(4047) (4048)
. Only two Rock
Wall Boards are shown; be sure to complete this step for all Rock Wall Boards.
3. Attach 90
°
Brackets
(N9)
to Ladder Legs
(4045) (4046)
using 3/8" Hardware
(H11) (H34) (H124)
.
4. Attach 90
°
Brackets
(N9)
to Rock Wall Legs
(3201)
using 3/8" Hardware
(H11) (H34) (H124)
.
5. Attach Rocks
(N156)
to Rock Wall Boards
(4047) (4048)
using 1/4" Hardware
(H7) (H32)
(H171)
and
#14 Hardware
(H166)
.
60
Step 19
Rock Wall & Step Ladder
T-Nut Installation