![background image](http://html1.mh-extra.com/html/rainbow/turbo-carnival-clubhouse/turbo-carnival-clubhouse_assembly-instructions-manual_3449621056.webp)
1
A
H3
H116
6129
6129
6129
6174
6173
H3
H116
3143
3135
H3
H116
6173
3139
H1
H100
H3
H116
3143
3135
3139
3143
6129 H3 H116
H1
H100
H100
DO NOT INSTALL THIS FACIA IF
INSTALLING TWO PLAY FEATURES
NEXT TO EACH OTHER ON THIS SIDE
DO NOT INSTALL THIS
FACIA IF INSTALLING TWO
PLAY FEATURES NEXT TO
EACH OTHER ON THIS SIDE
4050
4050
4053
MOUNT FACIA WITH
DRILLED HOLE HERE
FACIA REMOVED FOR
CLARITY OF VIEW
INSET A
FRONT
SIDE OF
SET
DETAIL A
H3
H116
H1
H100
3135
4053
1 5/8"
29"
7/16" DIA. HOLE W/ 1 1/8" DIA.
COUNTER BORE; 3/8" DEEP
3143
1. In one 2 Hole Facia
(3143),
drill a
7/16" diameter hole
with a
1 1/8" diameter counter bore, 3/8"
deep
, referring to Inset A for hole location.
*NOTE: Depending on your set configuration, Corner Facias (3139) may be flipped to opposite
Upright. If installing Spiral Slide, do not install Corner Facia (3139) on front of set.
2. Position Facias
(3135) (3139) (3143)
against Corner Uprights
(6129) (6173) (6174)
, in locations shown.
Attach Facias to Uprights using 3/8" Hardware
(H3) (H116)
.
*NOTE: Ends of Facias must be flush with edges of Uprights, and bottoms of Facias must be
flush with tops of decks when properly installed.
*NOTE: If installing two play features next to each other, in locations shown, do not install
Corner Facias (3139) on that side. "Play Features" include the Fire Pole, Coil
Climber, Ramp, Ladder and Slide.
3. Finish attaching Corner Facias
(3135) (3139)
to Facias
(4050) (4053)
using 1/4" Hardware
(H1) (H100)
(as shown in Detail A).
55
Step 15
Facia Installation