![background image](http://html1.mh-extra.com/html/rainbow/turbo-carnival-clubhouse/turbo-carnival-clubhouse_assembly-instructions-manual_3449621043.webp)
H34
H34
H3
H116
H3
H11
H131
4050
H3
H116
H131
H3
H116
H29
H18
H12
H4
6175
6108
6107
H116
H3
H5
H71 H71
H5
6131
H4
H12
H18
H29
6173
6174
H5
H78
COUNTER BORED
HOLE FACING IN
COUNTER BORED
HOLES IN TOP JOIST
FACING DOWN
COUNTER BORED
HOLES FACING IN
POUND T-NUTS INTO
BACKS OF UPRIGHTS
BE SURE TO INSTALL
HARDWARE (H5) (H71)
PRIOR TO INSTALLING
SLIM BRACKET (6108)
MAIN BEAM FLUSH
WITH FACE OF
THIS UPRIGHT
A
6131
6173
INSET A
COUNTER BORED HOLES
IN TOP JOIST FACING OUT
*NOTE: Pre-drill 1/4" holes for all 3/8" Lag Bolts.
1. Begin second Wall Assembly by using a hammer to pound 3/8" T-Nuts
(H34)
into bottom holes in
Corner Uprights
(6173) (6174)
. Attach 4 Hole Facia
(4050)
to Corner Uprights
(6173) (6174)
using 3/8"
Hardware
(H3) (H11) (H34) (H131)
. Insert 3/8" Hardware in bottom holes only. Ends and bottom of
4 Hole Facia
(4050)
must be flush with Corner Uprights
(6173) (6174)
when properly installed.
2. Attach Top Joist w/Swing Holes
(6131)
to Corner Uprights
(6173) (6174)
using 3/4" Hardware
(H5)
and 1/2" Hardware
(H4) (H12) (H18) (H29) (H71)
. Top Joist must be oriented as shown in Inset A, with
counter bored holes facing out.
3. Attach Main Beam
(6175)
to Corner Uprights
(6173) (6174)
using 3/4" Hardware
(H5)
and 1/2"
Hardware
(H4) (H12) (H18) (H29) (H71)
. Ensure Main Beam
(6175)
is positioned with counter bored
holes out (as shown).
4. Check that Wall Assembly is plumb and square and insert 3/8" Hardware
(H3) (H116)
into top holes
of 4 Hole Facia
(4050)
.
5. Install 3/4" Hardware
(H5) (H78)
into hole in Corner Upright
(6174)
(as shown).
6. Install Left and Right Slim Brackets
(6107) (6108)
up against Corner Uprights
(6173) (6174)
and Main
Beam
(6175)
and attach using 3/8" Hardware
(H3) (H116)
.
*NOTE: Slim Bracket (6108) should be pushed up tight to previously installed 3/4" Hardware
(H5) (H78). Remaining faces of Slim Brackets (6107) (6108), Main Beam (6175) and
Corner Uprights (6173) (6174) should have no gaps when properly installed.
42
Step 3
Second Wall Assembly