![background image](http://html1.mh-extra.com/html/rainbow/turbo-carnival-clubhouse/turbo-carnival-clubhouse_assembly-instructions-manual_3449621088.webp)
B
C
6144
6145
6173
6952
H116
H3
H3
H116
ADJOINING FACES OF
SLIM BRACKETS,
MONKEY BAR,UPRIGHT
& SLIDE BLOCK
SHOULD HAVE NO GAPS
*NOTE: At this point, the 60" and 70" Deck Height Monkey Bars will use the same processes
unless otherwise noted.
1. Push Slim Brackets
(6144) (6145) (6395) (6396)
up tight to Monkey Bar, Upright
(6173)
and Slide
Block
(6952)
. Attach Brackets using 3/8" Hardware
(H3) (H116)
(as shown in Inset A).
*NOTE: Adjoining faces of Slim Brackets, Monkey Bar, Upright and Slide Block should have
no gaps when properly installed.
*NOTE: If installing 60" Deck Height Monkey Bar towards middle of set, the Right Slim Bracket
(6145) will not be installed.
2. On inside of set, push the two outer Rail Uprights
(3137)
up tight to Monkey Bar and attach to 6 Hole
Facia
(4051)
and 2 Hole Facia
(3139)
using #8 Hardware
(H155)
(as shown in Inset B).
*NOTE: If installing Monkey Bar on 60" Deck Height, evenly space Rail Uprights (3137) across
back of Accessory Arm (6134) and Corner Facia (3139) using same processes.
3. Evenly space the other two Rail Uprights
(3137)
and attach using #8 Hardware
(H155)
.
*NOTE: Gaps between the two inner Rail Uprights will measure approximately 1 3/8" when
properly installed (as shown).
INSET A
INSET B
SLIDE REMOVED
FOR CLARITY
OF VIEW
6395
1 3/8"
4051
3139
PUSH RAIL UPRIGHT UP
TIGHT TO MONKEY BAR
PUSH RAIL UPRIGHT UP
TIGHT TO MONKEY BAR
3137
H155
H155
6396
87
Step 41
Slim Bracket & Rail
Upright Installation