![background image](http://html1.mh-extra.com/html/rainbow/turbo-carnival-clubhouse/turbo-carnival-clubhouse_assembly-instructions-manual_3449621047.webp)
85 5/8"
H3
H11
H131
H34
H116
H3
4050
6129
6129
H34
H3
H11
H131
6107
H3
H116
H71 H5
H4
H12
H18
H29
H3
6108
H116
4050
H116
H3
H4
H12
H18
H29
H5
H71
6132
OFFSET
HOLES UP
OFFSET
HOLES
DOWN
A
COUNTER BORED
HOLE FACING OUT
INSET A
1. Pound 3/8" T-Nuts
(H34)
into bottom holes in backs of Corner Uprights
(6129)
. Attach 4 Hole Facia
(4050)
to Corner Uprights
(6129)
using 3/8" Hardware
(H3) (H11) (H34) (H131)
. Insert 3/8" Hardware
in bottom holes only. Ends and bottom of 4 Hole Facia
(4050)
must be flush with Corner Uprights
(6129)
and facia must be oriented as shown with offset holes up, when properly installed.
2. Measure up
85 5/8"
and attach 4 Hole Facia
(4050)
to Corner Uprights
(6129)
using 3/8" Hardware
(H3) (H116)
. Offset holes in 4 Hole Facia must be down (as shown) when properly installed.
3. Attach Main Beam
(6132)
to Corner Uprights
(6129)
using 3/4" Hardware
(H5)
and 1/2" Hardware
(H4)
(H12) (H18) (H29) (H71)
. Ensure Main Beam
(6132)
is positioned with counter bored holes out (as
shown in Inset A).
4. Check that Wall Assembly is plumb and square and insert 3/8" Hardware
(H3) (H116)
into top holes
of 4 Hole Facia
(4050)
.
5. Install Left and Right Slim Brackets
(6107) (6108)
up against Corner Uprights
(6129)
and Main Beam
(6132)
and attach using 3/8" Hardware
(H3) (H116)
.
*NOTE: Faces of Slim Brackets (6107) (6108), Main Beam (6132) and Corner Uprights (6129)
should have no gaps when properly installed.
46
Step 7
Lower Level Wall
Assembly