![background image](http://html1.mh-extra.com/html/rainbow/turbo-carnival-clubhouse/turbo-carnival-clubhouse_assembly-instructions-manual_3449621049.webp)
A
85 5/8"
OFFSET
HOLES
UP
H116
H3
4051
6134
H71
H5
H4
H12
H18
H29
6107
H3
H116
6129
6129
6129
6129
4050
36"
CUT OFF
THIS END
ROUTER AND
STAIN CUT END
INSET A
6134
*NOTE: Depending on your set configuration, the Accessory Arm (6134) may need to be cut
down. Refer to Inset A for modification instructions.
1. Measure up
85 5/8"
and attach 6 Hole Facia
(4051)
to Corner Uprights
(6129)
using 3/8" Hardware
(H3) (H116)
. Be sure that Facia is flush with outside faces of Uprights and oriented as shown with
offset holes up.
*NOTE: Top of 6 Hole Facia (4051) will be flush with top of 4 Hole Facia (4050) when properly
installed.
2. Position Accessory Arm
(6134)
against Corner Uprights
(6129)
, lining up holes in Accessory Arm with
previously drilled holes in Uprights. Attach Accessory Arm using 3/4" Hardware
(H5)
and 1/2"
Hardware
(H4) (H12) (H18) (H29) (H71)
.
3. Position Right Slim Bracket
(6107)
up against Accessory Arm
(6134)
and Corner Upright
(6129)
and
attach using 3/8" Hardware
(H3) (H116)
.
*NOTE: Adjoining faces of Slim Bracket, Accessory Arm and Corner Upright should have no
gaps when properly installed.
48
Step 9
Lower Level Wall
Assembly