![background image](http://html1.mh-extra.com/html/rainbow/turbo-carnival-clubhouse/turbo-carnival-clubhouse_assembly-instructions-manual_3449621046.webp)
MATCH DRILL
THROUGH
COUNTER
BORED HOLES
MATCH DRILL
THROUGH
COUNTER
BORED HOLES
H116
H3
6107
6108
6132
6174
6129
6174
6129
H116
H3
H3
H116
H71
H5
H4 H12
H18 H29
H4
H12
H18
H29
H5
H71
FACES
FLUSH
FACES
FLUSH
IF INSTALLING "DOUBLE
DEEP" SANDBOX UNDER
LOWER LEVEL, DRILL
COUNTER BORES ON
THIS SIDE OF UPRIGHTS
AND REVERSE DIRECTION
OF HARDWARE SHOWN
DO NOT INSTALL
HARDWARE (H29)
1. Using a
9/16" drill bit
, match drill through counter bored holes in Uprights
(6174)
, through Uprights
(6129)
.
*NOTE: Be sure prior to match drilling, outside faces of Uprights (6129) (6174) are flush.
*NOTE: If installing "Double Deep" sandbox under lower level side of set, a 1 1/2" diameter
counter bore, 1 1/16" deep will have to be drilled in bottom two holes drilled in #1, in
Uprights (6129).
2. Finish attaching Uprights
(6129)
to Uprights
(6174)
, through previously drilled holes, using 3/4"
Hardware
(H5)
and 1/2" Hardware
(H4) (H12) (H18) (H29) (H71)
.
*NOTE: If counter bored holes were drilled for "Double Deep" sandbox, reverse the hardware
shown below, and do not install 1/2" Hardware (H29).
3. Position Left and Right Slim Brackets
(6107) (6108)
up against Main Beam
(6132)
and Uprights
(6129)
.
Attach Brackets using 3/8" Hardware
(H3) (H116)
.
*NOTE: Adjoining faces of Brackets (6107) (6108), Main Beam (6132) and Uprights (6129)
should have no gaps when properly installed.
45
Step 6
Lower Level Wall
Assembly