TOP VIEW OF SET
(DECK PATTERN)
3140
4052
4052
4052
4052
3144
4052
4052
4052
4052
4052
3140
3140
3140
4052
4052
4052
4052
4052
3144
4052
4052
4052
4052
3140
6129
6173
6173
6129
6129
6129
6174
6174
1 5/8"
4 13/16"
7/16" DIA HOLE
W/ 1 1/8" DIA COUNTER
BORE; 3/8" DEEP
INSET A
3203
Continued on next page:
1. Layout and evenly space Deck Boards
(3140) (3144) (4052)
across Main Beams
(6132) (6175)
referring to pattern shown below. Attach Deck Boards to Main Beams using #8 Hardware
(H155)
.
*NOTE: Deck Boards (3140) (3144) (4052) must be flush with faces of Corner Uprights (6129)
(6173) (6174) when properly installed.
*NOTE: If installing tarp option, a 7/16" diameter hole with a 1 1/8" diameter counter bore,
3/8" deep will have to be drilled in one end of Deck Runner (3203).
2. Center and attach Deck Runner
(3203)
, on underside of upper deck, using #8 Hardware
(H155)
.
*NOTE: If installing Tarp Option, be sure to orient Deck Runner so that the counter bored
hole is towards middle of set as shown. Counter bored hole should line up with
center hole of Short Deck Board (3140) when properly installed.
*NOTE: If Center Posts (6133) (6140) are being mounted through the Deck, because the
Corner Facia (3139) is not being mounted, the Deck Runner (3141) will need to be
modified and can be drilled prior to installation. Refer to Step 16 for modification
instructions.
3. Center and attach Deck Runner
(3141)
, on under side of lower Deck using #8 Hardware
(H155)
.
*NOTE: If Deck Runner (3141) has been modified, do not install #8 Hardware in center hole of
Short Deck Board (3140).
52
Step 13
Deck Installation