![background image](http://html1.mh-extra.com/html/rainbow/turbo-carnival-clubhouse/turbo-carnival-clubhouse_assembly-instructions-manual_3449621083.webp)
BACK SIDE OF
SUPPORT
COUNTER BORED
HOLES UP
STEPS CENTERED
IN NOTCHES
7846
7845
4006
6981
7848
7847
H3
H119
H216
N3
H188
24"
1 1/4"
23 7/8"
1"
1"
7846
7845
6981
7848
7847
4006
N3
1. Place Left and Right Monkey Bar Arms
(7845) (7846)
on a flat surface directly across from each other,
oriented with counter bored holes facing up as shown.
2. Insert Pipes
(N3)
into pipe holes in both Monkey Bar Arms
(7845) (7846)
to connect the two Monkey
Bar Arms
(7845) (7846)
together.
*NOTE: Monkey Bar assembly must measure 23 7/8" wide when properly assembled.
3. Ensure width of Monkey Bar assembly is
23 7/8"
wide (as shown) and insert #8 Hardware
(H216)
through Monkey Bar Arms
(7845) (7846)
into Pipes
(N3)
, to secure Pipes in pipe holes. Screws should
be approximately
1"
from inside face of Monkey Bar Arms
(7845) (7846)
(as shown).
4. Position Monkey Bar Support Legs
(7847) (7848)
on flat surface directly across from each other, with
back sides of Support Legs facing up.
5. Center Ladder Steps
(4006)
in notches of Support Legs
(7847) (7848)
and attach using #8 Hardware
(H188)
.
*NOTE: Inside faces of Support Legs must measure 24” when properly assembled.
6. Measure up
1 1/4”
from bottom of Support Legs
(7847) (7848)
and attach Monkey Bar Ground
Runner
(6981)
to back side of Monkey Bar Support using 3/8” Hardware
(H3) (H119)
.
*NOTE: Counter bored holes in Monkey Bar Ground Runner (6981) should be centered on
Support Legs (7847) (7848) when properly installed.
82
Step 38
70" Deck Height Monkey
Bar Assembly