![background image](http://html1.mh-extra.com/html/rainbow/turbo-carnival-clubhouse/turbo-carnival-clubhouse_assembly-instructions-manual_3449621089.webp)
A
25 1/2"
H30
H3
H11
H133
N380
MATCH DRILL THROUGH
THESE HOLES
*NOTE: Depending on set configuration, Chin Up Bar may be mounted on either Monkey
Bar arm.
1. Hold Chin Up Bar
(N380)
on underside of Monkey Bar in approximate location shown. Make a mark
in center of both holes in Chin Up Bar.
*NOTE: Be sure when positioning Chin Up Bar, drill holes will not hit Rungs in Monkey Bar.
2. Drill holes through Monkey Bar, on previously made marks, using a
7/16" drill bit
.
3. Attach Chin Up Bar
(N380)
to Monkey Bar using 3/8" Hardware
(H3) (H11) (H30) (H133)
.
*NOTE: A small hammer or mallet may be needed to pound in 3/8" Hardware (H30).
88
Step 42
Chin Up Bar
Installation