![background image](http://html1.mh-extra.com/html/rainbow/turbo-carnival-clubhouse/turbo-carnival-clubhouse_assembly-instructions-manual_3449621064.webp)
1
A
6129
4050
H167
N5
6133
6140
LADDER MAY BE
MOUNTED HERE
DETAIL A
ENSURE #14 HARDWARE
DOES NOT GO INTO
COUNTER BORED HOLE
4050
N9
H164
6140
C
9 1/2"
11"
INSET A
TOP LADDER STEP
6133
6129
4050
*NOTE: Depending on your set configuration, it is possible to mount the ladder one opening
to the right. Use the same processes shown.
1. Center Ladder Assembly between Corner Upright
(6129)
and Center Post
(6133) (6140)
.
2. Ensure Ladder Steps are level and attach Ladder assembly to 4 Hole Facia
(4050)
through 90
Brackets
(N9)
using #14 Hardware
(H164)
.
*NOTE: Top Ladder Step must measure 11" from top of Deck when properly installed (as
shown in Inset A).
*NOTE: Ensure #14 Hardware does not go into counter bored hole in 4 Hole Facia (4050).
3. Fully tighten 3/8" Hardware in 90 Brackets
(N9)
.
4. Measure up from deck
9 1/2"
on Corner Upright
(6129)
and Center Post
(6133) (6140)
and attach
Safety Handle
(N5)
using #14 Hardware
(H167)
.
N5
63
Step 22
Step Ladder
Installation