OFFSET
HOLES UP
H29
H18
H12
H4
H78
6174
6129
H116
H3
H3
H11
H138
H34
6129
6174
H78
6132
4050
1. Position Corner Uprights
(6129)
against Corner Uprights
(6174)
, lining up middle holes in Corner
Uprights with previously installed 3/4" Hardware
(H78)
.
2. Position Main Beam
(6132)
against Corner Uprights
(6129)
, with counter bored holes facing out, lining
up holes with previously installed 3/4" Hardware
(H78)
. Attach Main Beam
(6132)
and Corner Uprights
(6129)
to Corner Uprights
(6174)
using 1/2" Hardware
(H4) (H12) (H18) (H29) (H78)
.
3. Pound 3/8" Hardware
(H34)
into bottom holes in the backs of Corner Uprights
(6174)
.
4. Position 4 Hole Facia
(4050)
against Corner Uprights
(6129)
, orienting facia as shown, with offset holes
up. Attach Facia
(4050)
, through bottom holes in facia, to Corner Uprights
(6129)
using 3/8" Hardware
(H3) (H11) (H34) (H138)
.
5. Finish attaching 4 Hole Facia
(4050)
, through top holes in facia, to Corner Uprights
(6129)
using 3/8"
Hardware
(H3) (H116)
.
44
Step 5
Lower Level Wall
Assembly