![background image](http://html1.mh-extra.com/html/rainbow/turbo-carnival-clubhouse/turbo-carnival-clubhouse_assembly-instructions-manual_3449621103.webp)
30 5/8"
1 1/4"
1 1/4"
0087
H154
H154
9183
0087
3183
3183
3183
3183
H154
FACES FLUSH
ENSURE ENTRAPMENT BOARD
DOES NOT STICK PAST EDGE
OF ROOF SUPPORT
1. On a flat Surface, layout Roof Supports
(3183)
and Peak Facias
(0087)
(as shown below). Attach
Peak Facias
(0087)
to Roof Supports
(3183)
using #8 Hardware
(H154)
.
*NOTE: Bottoms of Roof Supports must measure 30 5/8" apart when properly installed.
*NOTE: Angled faces of Peak Facias must line up with faces of Roof Supports when
properly installed.
2. On one of the Roof Support assemblies, position Entrapment Board
(9183) 1 1/4"
up from bottom
of Roof Supports
(3183)
. Attach Entrapment Board
(9183)
to Roof Supports
(3183)
using #8
Hardware
(H154)
.
*NOTE: Ensure ends of Entrapment Board do not stick past edges of Roof Supports.
102
Step 55
Penthouse Wood Roof
Support Assembly