3153 User Manual
Configuring The Instrument 2-4
Figure 2-1,
Logical Address Set to “2”
Installation
The instrument can be installed in any slot except slot 0 in a VXIbus
mainframe. When inserting the instrument into the mainframe, it should
be gently rocked back and forth to seat the connectors into the
backplane receptacle. The ejectors will be at right angles to the front
panel when the instrument is properly seated into the backplane. Use
two captive screws above and below the ejectors to secure the
instrument into the chassis.
After installation, perform an initial checkout and operational verification.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com