User Manual 3153
Using The Instrument 3-6
The command:
APPLy:EXPonential
<frequency>,<amplitude>,<offset>,<exponent>}
programs the generator to output an exponential waveform with
frequency, amplitude, offset, and exponent parameters. The default
settings for these parameters are: 1MHz, 5Vpk-pk, 0V and -10.
The command:
APPLy:GAUSsian {<frequency>,<amplitude>,<offset>,<exponent>}
programs the generator to output a gaussian waveform with frequency,
amplitude, offset, and exponent parameters. The default settings for
these parameters are: 1MHz, 5Vpk-pk, 0V and 10.
The command:
APPLy:DC {<percent_amplitude>}
programs the generator to output a DC level. The DC level is set as a
percent of programmed amplitude. The default setting for this function
is 100%.
The command:
APPLy:USER
{<segment_number>,<sampling_clock>,<amplitude>,<offset>}
programs the generator to output an arbitrary waveform. The specified
segment number must be loaded with an arbitrary waveform before the
generator can execute this command successfully. This command lets
you specify segment number, sampling clock rate, amplitude and offset.
The default settings for these parameters are: 1, 1MHz, 5Vpk-pk and
0V.
The query:
APPLy:<function_shape>?
queries parameters associated with the specified function shape.
Returns a string of values depending on the parameters that are
available for the selected function shape.
The query:
APPLy?
queries parameters associated with the currently selected function
shape and returns a string of values depending on the parameters
available for the selected function shape. For example, if the generator
is programmed to output a ramp waveform, the APPL? command
returns: "1e+6, 5, 0 , 0, 10, 10, 10".
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com