User Manual 3153
Specifications
A-10
Filters
2 per Channel
Channel 1
none, 25 MHz, 50 MHz 7-pole
25MHz Amplitude Response
Insertion Loss
<4 dB (DC-22.5MHz)
Stopband Attenuation
>47dB @ 55MHz
50MHz Amplitude Response
Insertion Loss
<4 dB (DC-45MHz)
Stopband Attenuation
>47dB @ 110MHz
Channel 2
none, 12.5MHz, 25MHz 7-pole
12.5MHz Amplitude Response
Insertion Loss
<4 dB (DC-11.25MHz)
Stopband Attenuation
>47dB @ 27.5MHz
25MHz Amplitude Response
Insertion Loss
<4 dB (DC-22.5MHz)
Stopband Attenuation
>47dB @ 55MHz
Channel 3
none, 250 kHz, 25MHz 7-pole
250kHz Amplitude Response
Insertion Loss
<1.75 dB (DC-250kHz)
Stopband Attenuation
>55dB @ 500kHz
25MHz Amplitude Response
Insertion Loss
<4 dB (DC-22.5MHz)
Stopband Attenuation
>47dB @ 55MHz
Square Wave, Pulse
Channels 1-3
Rise/Fall time
<12ns, 10% to 90% of amplitude
Aberration
<5% + 10mV
Low Level Outputs
Description
Channels 2 and 3 have alternate outputs of fixed amplitude,
2Vpk-pk. Selection of these alternate outputs disables
operation of channel 2 and 3 main outputs. Output filter
selections are valid for Channel 2 and 3 low level outputs.
SYNC Output
Description
The sync output generates a single TTL pulse for
synchronizing other instruments to the output waveform.
The sync signal is validated for a number of different
reasons. The sync signal can be delayed a fixed number of
clock cycles. Each channel has a single sync output. Sync
position and width are programmable.
SYNC Sources
Front Panel
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com