User Manual 3153
Getting Started 1-7
Figure 1-2, The Front Panel
Output - Channel 1
The channel 1 output connector outputs fixed (standard) waveforms to
50 MHz, user (arbitrary) and sequenced waveforms with sampling clock
to 100 MSa/s. Output impedance is 50
Ω
, therefore, for best
performance, the cable connected to this output should be terminated
with 50
Ω
. Output amplitude accuracy is calibrated when connected to a
50
Ω
load. If the output is connected to a different load resistance,
determine the actual amplitude using the following equation:
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com