User Manual 3153
SCPI Command Reference 4-10
Instrument
Programming
Command
Summary
Instrument Programming commands define how SCPI commands will
affect the generator. These commands define waveform data format,
which of the channels is the active listener and if the channels will
operate separately or synchronized to a master channel. Optional nodes
may be omitted from these commands. Factory defaults after *RST are
shown in bold typeface. Parameter low and high limits are given where
applicable.
Commands and Parameters
:FORMat:BORDer {NORMal | SWAPped}
:FORMat:BORDer?
:FORMat:WAVE {
NORMal
| USER}
:FORMAt:WAVE?
:INSTrument: {
1
| 2 | 3}
:INSTrument?
:INSTrument:COUPle {
NONE
| 2 | 3 | ALL}
:INSTRument:COUPle?
:INSTrument:PHASe {phase_offset}
(
0
,0,n)
:INSTRument:PHASe?
Output
Configuration
Command
Summary
Output Configuration commands control the output function, shape,
frequency, amplitude and filter type. Optional nodes may be omitted
from these commands. Factory defaults after *RST are shown in bold
typeface. Parameter low and high limits are given where applicable. Use
the Standard Waveform parameters as described in
Using The APPLy
Command
.
Commands and Parameters
{Default,
Low
Limit,High
Limit
}
[:SOURce]
:APPLy:SINusoid {<frequency>,[<amplitude>,[<offset>,[<phase>]]]}
:APPLy:TRIangle {<frequency>,[<amplitude>,[<offset>,[<phase>]]]}
:APPLy:SQUare {<frequency>,[<amplitude>,[<offset>,[<duty_cycle>]]]}
:APPLy:PULSe {<freq.>,[<amp.>,[<offset>,[<delay>,[<high_time> ,[<rise_time>, [<fall_time>]]]]]]}
:APPLy:RAMP {<frequency>,[<amplitude>,[<offset>,[<delay>,[<rise_time>,[<fall_time>]]]]]}
:APPLy:SINC {<frequency>,[<amplitude>,[<offset>,[<number_cycles>]]]}
:APPLy:EXPonential {<frequency>,[<amplitude>,[<offset>,[<exponent>]]]}
:APPLy:GAUSsian {<frequency>,[<amplitude>,[<offset>,[<exponent>]]]}
:APPLy:DC {<percent_amplitude>}
:APPLy:USER {<segment_number>,[<sampling_clock>,[<amplitude>,[<offset>]]]}
:APPLy:<function_shape>?
:APPLy?
:FUNCTion:MODE {
FIXed
| USER | SEQuence}
:FUNCTion:MODE?
:FUNCtion:SHAPe {
SINusoid
| TRIangle | SQUare | PULSe | RAMP | SINC
:EXPonential | GAUSsian | NOISe | DC }
:FUNCtion:SHAPe?
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
