User Manual 3153
Getting Started 1-15
Figure 1- 7. Sequenced Waveforms
The table below from WaveCAD’s Sequence Table Editor, shows how the same
sequence can be defined using WaveCAD.
Figure 1- 8, WaveCAD Example
Output State
The main outputs can be turned on or off. The internal circuit is
disconnected from the output connector by a mechanical switch (relay).
This feature is useful for connecting the main outputs to an analog bus.
For safety reasons, when power is first applied to the chassis, the main
output is always off.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com