User Manual 3153
Using The Instrument 3-16
Figure 3-3, WaveCAD Filter Control Panel
Selecting an
Operating Mode
The Model 3153 offers four operating modes: Continuous, Triggered,
Gated and Burst. The selected waveform is repeated continuously when
the instrument is set to operate in Continuous mode. In this mode, the
Model 3153 does not require a trigger source to stimulate output cycles.
The default operating mode of the instrument is continuous.
Triggered, Gated, and Burst modes require an external signal to initiate
output cycles. Information on how to trigger, gate or output a burst of
waveforms is given in the following paragraphs. The WaveCAD Trigger
control panel shows a high-level example of selecting the trigger mode.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com