=
For details, refer to
Storing and recalling
broadcast frequencies
on this page.
Operating by hardware
buttons
Pressing the
BAND/ESC
button
Band can be selected from among
FM1
,
FM2
,
FM3
, or
AM
.
Pressing
MULTI-CONTROL
up or down
You can recall radio stations assigned to pre-
set tuning keys
to
.
Pressing
MULTI-CONTROL
left or right
The frequencies move up or down step by
step.
Pressing and holding
MULTI-CONTROL
left or right
The tuner will scan the frequencies until a
broadcast strong enough for good reception is
found.
p
You can cancel seek tuning by pressing
MULTI-CONTROL
left or right.
Pressing the center of
MULTI-CONTROL
The function select screen appears.
Storing and recalling
broadcast frequencies
With a touch of any of the preset tuning keys
to
, you can easily store up to six broad-
cast frequencies for later recall (also with the
touch of a key).
1
When you find a frequency that you
want to store in memory, keep touching a
preset tuning key
to
until the preset
number (e.g., P.CH1) stops flashing.
The selected radio station has been stored in
memory.
2
Touch the same preset tuning key
to
.
The radio station frequencies are recalled from
memory.
Using the function menu
1
Display the
“
Function Menu
”
screen.
=
For details of the operation, refer to
Display-
ing the
“
Function Menu
”
screen
on page
81.
2
Turn MULTI-CONTROL to select a func-
tion.
Turning
MULTI-CONTROL
switches between
the functions in the following order:
BSM
(best stations memory)
—
Local
(local
seek tuning)
—
Seek Mode
(seek mode)
—
Blending
(reception mode)
Storing the strongest
broadcast frequencies
“
BSM
”
(best stations memory) lets you auto-
matically store the six strongest broadcast fre-
quencies under the preset tuning keys
to
and, once stored there, you can tune in to
these frequencies with the touch of a key.
1
Display the
“
Function Menu
”
screen.
=
For details of the operation, refer to
Display-
ing the
“
Function Menu
”
screen
on page
81.
2
Turn MULTI-CONTROL to display
“
BSM
”
.
3
Press the center of MULTI-CONTROL to
begin a search.
“
Searching
”
begins to flash. While
“
Search-
ing
”
is flashing, the six strongest broadcast
frequencies will be stored under the preset
tuning keys
to
in order of their signal
strength. When this is complete,
“
Searching
”
stops flashing.
p
To cancel the storage process, press the
center of
MULTI-CONTROL
again.
p
Storing broadcast frequencies with BSM
may replace broadcast frequencies you
have already saved by using
to
.
En
85
Chapter
17
HD
Radio
™
reception
HD Radio
™
reception
Summary of Contents for AVIC-X930BT
