3
Turn the ignition switch to ON or ACC.
If the vehicle
’
s air conditioner or heater is
turned on, turn it off. Noise from the fan in the
air conditioner or heater may prevent correct
Auto EQ.
4
Turn off the AV source.
=
For details of the operations, refer to
Dis-
playing the AV operation screen
on page 70.
5
Set the video setting for the rear dis-
play to
“
Mirror AV
”
.
=
For details of the operations, refer to
Select-
ing the video for rear display
on page 168.
6
Display the
“
AV System Settings
”
screen.
=
For details, refer to
Displaying the screen for
AV system settings
on page 170.
7
Touch [Auto EQ Meas.].
The
“
Auto EQ Measurement
”
screen ap-
pears.
8
Plug the microphone into the mini-jack
connector.
USB and mini-jack connector
Microphone for acoustical measurement (sold separately)
9
Touch [Start].
A 10-second countdown starts.
10 Exit the vehicle and keep the door
closed until the countdown finishes.
When the countdown is over, a measurement
tone (noise) is emitted from the speakers and
the Auto EQ measurement begins.
11 Wait until the measurement is com-
pleted.
When Auto EQ is completed, a message is dis-
played indicating that the measurement is
completed.
p
If the vehicle
’
s acoustics cannot be mea-
sured correctly, an error message will be
displayed.
p
The measurement time varies depending
on the type of vehicle.
p
To stop the measurement, touch [
Stop
].
12 Touch [OK].
13 Store the microphone carefully in the
glove compartment or another safe place.
If the microphone is subjected to direct sun-
light for an extended period of time, high tem-
peratures may cause distortion, color change
or malfunction.
Using sonic center control
Sound that is suited for the listening position
can easily be created with this function.
1
Display the
“
AV Sound Settings
”
screen.
=
For details, refer to
Displaying the screen for
AV sound settings
on page 174.
2
Touch [Sonic Center Control].
3
Touch [
c
] or [
d
] to select a listening po-
sition.
p
The larger the value of the range:
“
Left7
”
to
“
Right7
”
setting, the greater the delay of
the speaker output.
En
179
Chapter
32
Customizing
pr
eferences
Customizing preferences
Summary of Contents for AVIC-X930BT
