Pioneer AVIC-X930BT, Operation Manual

Page: 351 / 445

Storing and recalling
broadcast frequencies
With a touch of any of the preset tuning keys
to , you can easily store up to six broad-
cast frequencies for later recall (also with the
touch of a key).
1 When you find a frequency that you
want to store in memory, keep touching a
preset tuning key
to until the preset
number (e.g., P.CH1) stops flashing.
The selected radio station has been stored in
memory.
p
Up to 18 FM stations, six for each of the
three FM bands, as well as six AM stations,
can be stored in memory.
2 Touch the same preset tuning key to
.
The radio station frequencies are recalled from
memory.
Using the function menu
1 Display the
“
Function Menu
”
screen.
=
For details of the operation, refer to Display-
ing the
“
Function Menu
”
screen on page
81.
2 Turn MULTI-CONTROL to select a func-
tion.
Turning
MULTI-CONTROL
switches between
the functions in the following order:
BSM (best stations memory)
—
Local (local
seek tuning)
Storing the strongest
broadcast frequencies
“
BSM
”
(best stations memory) lets you auto-
matically store the six strongest broadcast fre-
quencies under the preset tuning keys
to
and, once stored there, you can tune in to
these frequencies with the touch of a key.
1 Display the
“
Function Menu
”
screen.
=
For details of the operation, refer to Display-
ing the
“
Function Menu
”
screen on page
81.
2 Turn MULTI-CONTROL to display
“
BSM
”
.
3 Press the center of MULTI-CONTROL to
begin a search.
“
Searching
”
begins to flash. While
“
Search-
ing
”
is flashing, the six strongest broadcast
frequencies will be stored under the preset
tuning keys
to in order of their signal
strength. When this is complete,
“
Searching
”
stops flashing.
p
To cancel the storage process, press the
center of
MULTI-CONTROL again.
p
Storing broadcast frequencies with BSM
may replace broadcast frequencies you
have already saved by using
to .
Tuning in strong signals
Local seek tuning allows you to tune in only
those radio stations with sufficiently strong
signals for good reception.
1 Display the
“
Function Menu
”
screen.
=
For details of the operation, refer to Display-
ing the
“
Function Menu
”
screen on page
81.
2 Turn MULTI-CONTROL to display
“
Local
”
.
3 Press the center of MULTI-CONTROL.
Each press of the center of MULTI-CONTROL
switches the setting between on and off.
4 Press MULTI-CONTROL left or right to
set the sensitivity.
!
FM :
Level 1
—
Level 2
—
Level 3
—
Level 4
!
AM : Level 1
—
Level 2
p
The highest level setting allows reception of
only the strongest stations, while lower set-
tings let you receive weaker stations.
En
83
Chapter
16
Using
the
radio
(
TUNER
)
Using the radio ( TUNER )