Pioneer AVIC-X930BT, Operation Manual

Page: 14 / 445

a
Multi-control (Volume knob/ /MUTE)
!
Rotate to adjust the AV (Audio and
Video) source volume.
!
Press the center of Multi-control to hear
the route guidance.
!
Press and hold the center of Multi-con-
trol to mute the AV (Audio and Video)
source. To cancel the muting, press and
hold it again.
b
Front panel
c
Detach button
Press to remove the front panel from the na-
vigation system.
=
For details, refer to Removing the front
panel on this page.
Protecting your product from theft
p
This function is available for AVIC-X930BT
and AVIC-X9310BT.
The front panel can be detached from the navi-
gation system to discourage theft, as de-
scribed below.
CAUTION
!
Do not expose the front panel to excessive
shock or disassemble it.
!
Never grip the buttons tightly or use force
when removing or attaching.
!
Keep the front panel out of reach of small chil-
dren to prevent them from putting it in their
mouths.
!
After removing the front panel, keep it in a
safe place so it is not scratched or damaged.
!
Keep the front panel out of direct sunlight and
high temperatures.
!
When removing or attaching the front panel,
do so after turning the ignition switch off
(ACC OFF).
Removing the front panel
p
The navigation system cannot be operated
while the front panel is removed from the
navigation system.
1 Press and hold the Detach button, and
slide it down.
When you release your finger, the bottom of
the front panel separates slightly from the na-
vigation system.
2 Gently grip the bottom of the front
panel and slowly pull it outward.
Front panel
Attaching the front panel
1 Slide the front panel all the way into
the navigation system.
Make sure the front panel is securely con-
nected to the mounting hooks of the naviga-
tion system.
2 Push the lower part of the front panel
until you hear a click.
If you fail to successfully attach the front panel
to the navigation system, try again but be care-
ful not to force it as the panel could be
damaged.
En
14
Chapter
02 Basic operation