Pioneer AVIC-X930BT, Operation Manual

Page: 166 / 445

p
Proper compatibility with allowable files is
not guaranteed.
p
Imported original images will be stored in
the built-in memory, but the ability to save
these images cannot be guaranteed com-
pletely. If your original image data is de-
leted, insert the SD memory card again
and re-import the original image.
p
The maximum number of images, includ-
ing the images in the built-in memory, that
can be imported and displayed on the list is
200.
1 Create a folder named
“
Pictures
”
on the
top-most directory of the SD memory card.
2 Store the picture files in the
“
Pictures
”
folder.
3 Insert an SD memory card into the SD
card slot.
=
For details of the operation, refer to Insert-
ing and ejecting an SD memory card on
page 16.
4 Display the
“
System Settings
”
screen.
=
For details, refer to Displaying the screen for
system settings on page 162.
5 Touch [Splash Screen].
The
“
Select Splash Screen
”
screen appears.
6 Touch [Select from SD].
The
“
Select Splash Screen
”
screen appears.
7 Touch the image to use as the splash
screen from the list.
The image is displayed on the screen.
8 Touch [OK].
The image is set as the splash screen, and the
“
System Settings
”
screen returns.
p
Images imported from the SD memory card
are added to the list on
“
Select Splash
Screen
”
.
Setting for rear view camera
The following two functions are available. The
rear view camera feature requires a separately
sold rear view camera (e.g. ND-BC4). (For de-
tails, consult your dealer.)
Rear view camera
The navigation system features a function that
automatically switches to the full-screen
image of the rear view camera installed on
your vehicle. When the shift lever is in the RE-
VERSE (R) position, the screen automatically
switches to full-screen rear view camera
image.
Camera for Rear view mode
Rear view can be displayed at all times (e.g.
when monitoring an attached trailer, etc.) as a
split screen where map information is partially
displayed. Please be aware that with this set-
ting, camera image is not resized to fit, and
that a portion of what is seen by the camera is
not viewable.
=
For details, refer to Setting for rear view
camera on this page.
CAUTION
Pioneer recommends the use of a camera which
outputs mirror reversed images, otherwise the
screen image may appear reversed.
p
Immediately verify whether the display
changes to a rear view camera image when
the shift lever is moved to REVERSE (R)
from another position.
p
When the screen changes to full-screen
rear view camera image during normal
driving, switch to the opposite setting in
“
Polarity
”
.
1 Display the
“
System Settings
”
screen.
=
For details, refer to Displaying the screen for
system settings on page 162.
2 Touch [Back Camera].
The
“
Back Camera Settings
”
screen appears.
En
166
Chapter
32 Customizing preferences