132
orbitalum tools GmbH
, D-78224 Singen, www.orbitalum.com, Phone +49 (0) 77 31 792-0
(14.01.21) OW_ORBIMAT_300SW_BA_852060202_00_EN
ORBIMAT 300 SW
EnGLISH
Reading and evaluating a log
X
Connect the USB medium to the PC.
The logs can also be displayed in the display of the machine.
X
Display data of the logs (actual current values, weld speed and arc voltage) as a table in the display.
8.10.4
Viewing and printing data
Configuring the printer
D
External printer connected, if applicable.
All the printers that can be selected are displayed in a list under "
System adjustments
".
X
Us the rotary knob to select the desired printer.
Printer selection is also possible via "
Basic settings
" in the process under "
Print log files
".
If "
Print log files
" is set to "
Off
", the list of possible printers is grayed out.
X
Select "
Internal
" for an internal printer.
– or –
Select "
USB
" for an external printer.
A symbol for the printer is displayed in the bottom right of the display.
Viewing and printing saved procedures and log files
1. In the main menu, select "
".
2. Press one of the following buttons:
Folder tree: This function prints the available structure of
the folders created in the system just like on a PC.
Procedure overview: Here, you are provided with a tabular
overview of all the procedures available on the machine,
however without the procedure parameters.
One procedure: Here you have to select an individual pro-
cedure via the folder structure which is then printed.
Log file overview: Prints the tabular overview of all the
available procedures.
Abb. 25:
Overview of the log files of a procedure
All logs for a procedure: You proceed to a procedure using the folder structure here as well. Now, all logs which were
generated when welding with this procedure are printed.
One procedure: You go to a procedure using the folder structure here as well. You are now presented with the overview
of all created logs with this procedure displayed as follows:
