Omron V440-F, User Manual

Page: 9 / 500

9
Precautions for Correct Use
V440-F C-Mount Code Reader User Manual
Precautions for Correct Use
Install and store the product in a location that meets the following conditions:
• Surrounding temperature of 0 to +40°C (–50 to +75°C in storage).
• No rapid changes in temperature (place where dew does not form).
• Relative humidity of between 5 and 85%.
• No presence of corrosive or flammable gases.
• Place free of dust, salts and iron particles.
• Place free of vibration and shock.
• Place out of direct sunlight.
• Place where it will not come into contact with water, oils, or chemicals.
• Place not affected by strong electromagnetic waves.
• Do not place near high-voltage or high-power equipment.
• For good heat dissipation, maintain sufficient distance between the product and other objects.
• Do not install the product immediately above significant sources of heat, such as heaters,
transformers, or large-capacity resistors.
• Do not allow the ambient temperature to exceed an operating temperature range.
• Provide a forced-air cooling fan or air conditioning if the ambient temperature is near the upper range
of operating temperature range. This will keep the ambient temperature from exceeding the upper
operating temperature range.
• Do not install the reader in a cabinet containing high-voltage equipment.
• Do not install the reader within 200 mm of power cables.
• To use the V440-F reader in an environment with a high level of noise, use the filter cable
V430-WXXF-XM.
• Do not apply excessive force to connectors. They may break and cause the product to malfunction.
• Turn OFF the power and ensure safety before maintenance.
• Optical components should be cleaned with a lens-cleaning cloth.
• Lightly wipe off dirt with a soft cloth.
• Do not use thinners or benzene.
• To ensure safe access for operation and maintenance, keep the reader as separate as possible from
high-voltage equipment and power machinery.
• When maintaining the product, be careful not to contact high-pressure or other electrical equipment.
Installation and Storage Sites
Ambient Temperature
Noise Resistance
Maintenance