Omron V440-F, User Manual

Page: 324 / 500

G-19
Appendices
V440-F C-Mount Code Reader User Manual
G-
12 UPC/EAN
G
G-12-
3 Separa
tor Status (U
PC
/EAN)
When set to
Required
, both the main and the supplemental symbols must be read.
For example, if
Supplementals
is set to
Required
,
Separator
is enabled, and an asterisk is defined as
the UPC separator character. Then the data is displayed as:
MAIN * SUPPLEMENTAL.
• Note:
Under no circumstances will the supplemental symbol data be sent without a main symbol.
• Note:
If additional symbols—other than the main or supplemental—will be read in the same read cycle,
Number of
Symbols
should be set accordingly.
• Note:
Whenever
Separator Character
is defined as a comma (
,
) sending a <
K473,s?
> command will return the cur-
rent settings, including the separator character comma which appears after the separator status comma.
Either 2 character or 5 character supplementals will be considered valid.
Only two character supplementals will be considered valid.
Only five character supplementals will be considered valid.
Required
G-12-3 Separator Status (UPC/EAN)
Usage:
Allows users to distinguish between the main and
Supplemental
symbols.
Definition:
A character can be inserted between the standard UPC or EAN symbology
and the supplemental symbology when
Supplementals
is set to
Enabled
or
Required.
Serial Cmd:
<
K473, UPC status,EAN status,supplementals status, separator status ,
separator character,supplemental type,format UPC-E as UPC-A
>
Default: Disabled
Options: 0 = Disabled
1 = Enabled
G-12-4 Separator Character (UPC/EAN)
Usage:
As required by the application.
Definition:
Allows the user to change the separator character from a comma to a new
character.
Serial Cmd:
<
K473, UPC status,EAN status,supplementals status,separator status,
separator character ,supplemental type,format UPC-E as UPC-A
>
Default: ,
(
comma
)
Options:
Any ASCII character.
G-12-5 Supplemental Type (UPC/EAN)
Usage:
As required by symbology used in application.
Definition:
Allows the user to select 2 character or 5 character supplements, or both.
Serial Cmd:
<
K473, UPC status,EAN status,supplementals status,separator status,
separator character, supplemental type ,format UPC-E as UPC-A
>
Default: Both
Options: 0 = Both
1 = 2 characters only 2 = 5 characters only
Both
2 Characters Only
5 Characters Only