Omron V440-F, User Manual

Page: 409 / 500

Appendices
J-10 V440-F C-Mount Code Reader User Manual
J-7 New Master Pin
Definition:
If
Matchcode
and
New Master Pin
are enabled and the new master pin
is momentarily activated (must be active for a minimum of 10 ms) master
symbol information will be loaded into the database based on the next
read cycle that achieves a Good Read, starting with
Index 1
.
Note:
For the V440-F, Input 1 (pin 3) is Default and Input 2 (pin 4) is New
Master.
Serial Cmd:
<
K225, status
>
Default: Disabled
Options: 0 = Disabled
1 = Enabled
J-7-1 New Master Load Status
Definition:
The new master status responds with the number of the next master
position to be loaded, where 0 represents “idle” or “no master to be
loaded.”
Example:
If the user has the
Number of Master Symbols
set to
1
, and
then either sends a
<G>
or toggles an active
New Master Pin
, the state
will be
1
, and prior to reading and effectively loading position
1
, the
response to
<NEWM>
would be
<NEWM/1>
. Once a symbol has been
read and loaded, the status will be cleared:
<NEWM/0>
.
Serial Cmd:
<
NEWM
>