Omron V440-F, User Manual

Page: 132 / 500

4-69
4 Setup
V440-F C-Mount Code Reader User Manual
4-
11
Con
figu
re Daisy C
h
ain
(If
Requ
ired b
y
App
licat
ion)
4
4-
11-2
Se
tting U
p a Daisy Cha
in Co
nfigu
ration with the Device D
iscover
y U
tility (
DDU)
The five most important areas in the Daisy Chain creation interface are:
• Group Information:
Contains the
Group Name
, Total
Count
,
Parent
Count, and
Children
Count
of the Daisy Chain being created. This information is dynamically updated as you make changes.
The Group Name text box is editable, and a group name must be provided to create a new Daisy
Chain.
• All Devices:
Contains all Daisy Chain-enabled devices that appear on the network. Devices are
represented by an image, a model, and an IP address. Each device is clickable. You can search
for specific devices using the
Filter Devices
search box.
• Parent:
The
Parent
container is empty upon opening the interface. This container is used to store
the
Parent
reader in the Daisy Chain. A maximum of one device can be placed in the Parent con-
tainer. A minimum of one device must be placed here to create the Daisy Chain.
• Children:
The
Children
container is empty upon opening the interface. This container is used to
store the
Children
readers in the Daisy Chain. A minimum of one device must be placed here to
create a Daisy Chain, and a maximum of seven devices may be placed here.
• Buttons:
This section of the interface includes the C
reate
,
Clear
, and
Exit
buttons.
• Create
creates a new Daisy Chain if all the necessary conditions are met.
Note:
The
Create
function does not delete a Daisy Chain and only resets the interface.
• Clear
resets the interface to its original state.
• Exit
closes the window.
Below these buttons, messages will appear that indicate any errors in the potential Daisy Chain being
created. These errors appear and disappear based on dynamic validation of user input.