Omron V440-F, User Manual

Page: 41 / 500

2 Quick Start
2-10 V440-F C-Mount Code Reader User Manual
Example 5: Minimum External Power Configuration
Dwg. Ref. Category Part Number
1 C-Mount Lens 3Z4S-  , 98-9000  -01
2 V440-F C-Mount 5 MP Camera V440-FXXXY50M-NN

3 Industrial High-Flex GigE Ethernet Cable with Jack Screws and RJ45 Connector 98-00013

-0

4 Industrial Switching HUB Example: W4S1 Series
5 Power Supply, 100-240VAC, +24VDC, M12 12-Pin Socket 97-000012-01
Example 6: USB Configuration
Dwg. Ref. Category Part Number
1 V440-F C-Mount 5 MP Camera V440-FXXXY50M-NN

2 Reader-to-QX-1 Interconnect Cable with USB Keyboard Wedge Breakout V430-WQK-3M *
3 M12-to-Flying Leads Cable V430-W8  -  M
* Insert the V430-WQK-3M cable between the V440-F and the V430-W8

-

M cable.
Example 7: RS-232C Configuration
Dwg. Ref. Category Part Number
1 V440-F C-Mount 5 MP Camera V440-FXXXY50M-NN 
2 Reader-to-QX-1 Interconnect Cable with RS-232 Breakout V430-WQR-3M *
3 M12-to-Flying Leads Cable V430-W8

-

M
* Insert the V430-WQR-3M cable between the V440-F and the V430-W8 cable.
*1. If connecting Omron’s CS/CJ/NJ Controller, check the connector shape and signal lines (pin assignments) and prepare the additional
RS-232C conversion cable. If connecting to Omron’s NX Machine Automation Controller, no additional RS-232C cable is required.