Omron V440-F, User Manual

Page: 293 / 500

Appendices
F-10 V440-F C-Mount Code Reader User Manual
F-6 Serial Trigger
Note: Serial Data
or
Serial Data or External Edge
triggering mode must be enabled for
Serial Trigger
Character
to take effect.
Usage:
Allows the user to define the trigger character and delimiters that start
and stop the read cycle.
Definition:
A serial trigger is considered an online host command and requires the
same command format as all host commands. It must be entered within
angle bracket delimiters
< >
or, in the case of non-delimited triggers, it must
define individual start and stop characters.
F-6-1 Serial Trigger Character (Delimited)
Usage:
Allows the user to define the trigger character that initiates the read cycle.
Definition:
A single ASCII host serial trigger character that initiates the read cycle.
A delimited trigger character is one that either starts or ends the read cycle
and is enclosed by delimiters such as
< >
.
Serial Cmd:
<
K201, serial trigger character
>
Default: Space bar
Options:
Any single ASCII character, including control characters, except NUL (0x00
in hex), an existing host command character, or an on-line protocol character.
Control characters entered on the command line are displayed in the menu
as mnemonic characters.