Omron V440-F, User Manual

Page: 458 / 500

N-5
Appendices
V440-F C-Mount Code Reader User Manual
N-4 F
o
rm
at Extrac
t
N
N
-4-1
Outp
ut Index
N-4 Format Extract
N-4-1 Output Index
Definition: Output Index
refers to the database entry you wish to modify with this command. A
formatted output is built by
extracting data from a symbol’s original data output
and/or
inserting user-defined characters.
It may be helpful to think of individual indexes as positions in the final formatted output
you wish to build. Starting with index # 1, enter either an extract or insert command to
begin building your desired output string. Then, with the next index number, enter either
an extract or insert command to continue building the output string. Continue this process
until you are finished building the string.
Serial Cmd:
<
K740, output index ,start location,length>
Options:
1 to 100
N-4-2 Start Location
Definition:
Defines the location within the symbol data where the character extraction will begin.
The first character extracted will also be the first character in the sequence displayed in
user-defined output.
Serial Cmd:
<
K740, output index, start location ,length>
Default: 0 (Disabled)
Options: 0
to
n
(maximum number of characters in the symbol data).
N-4-3 Length
Definition:
Defines the length (in consecutive characters) that will be extracted and placed in
user-defined output.
Serial Cmd:
<
K740, output index,start location, length >
Default: 0
(Disabled; end of format cell array)
Options: 0
to
n
(maximum number of characters in the symbol data).